Manual alarm button installation location

[ Huaqiang Security Network News ]
Two questions are explained for everyone, one is the manual alarm button, and the second manual alarm button is installed.
Manual alarm button: The manual alarm button is a type of equipment in the fire alarm system. When a person finds a fire, when the fire detector does not detect the fire, the person manually presses the manual alarm button to report the fire signal. Under normal circumstances, when the manual alarm button alarms, the fire is more likely to occur than the fire detector, and there is almost no possibility of false alarms. Because the alarm start condition of the manual alarm button is that the button must be manually activated. When the manual alarm button is pressed, the fire alarm confirmation light on the manual alarm button will light for 3-5 seconds. This status light indicates that the fire alarm controller has received the fire alarm signal and confirmed the site position.
Manual alarm button installation location
Manual alarm button installation location
1. At least one manual fire alarm button should be set for each fire compartment. The distance from any location within a fire zone to the nearest manual fire alarm button should not exceed 30m. The manual fire alarm button should be placed at the entrance and exit of the public event venue.
2. The manual fire alarm button should be set at the obvious and easy to operate part. When installed on a wall, the height of the bottom margin should be 1.3 to 1.5 m, and should have obvious signs.

Checker plate includes various kinds of tread.Normally there are big five bar,small five bar,two bar,stucco,,pointer,diamond and so on.
Five bar Aluminum Sheet with great antiskid property and widly used on the floor.
Stucco aluminum sheet is widly used in refrigerator,air conditioner and packing.
The alloy 1050 1060 1100 1235 checker plate is used in freezer,floor and packing.
3000 series checker plate,mainly 3003,have strong rust-proof property, this kind of aluminum sheet is widly used in trucks and cold storage floor.
5000 series checker plate especially alloy 5052 is used many humid environment such as watercraft.They have load capacity nature.

Aluminum Checker Plate

Aluminum Checker Plate,Aluminium Tread Plate ,Aluminum Plate 6061,Aluminum Film Plate

Henan Everwin Trade Co., Ltd. , https://www.ewaluminium.com